Waterproof acrylic coating (0.70 L) that makes horizontal and vertical surfaces in bathrooms, showers and kitchens 100% waterproof before tiling or other finishing. Suitable for all substrates — including slightly damp ones — such as wood, plasterboard, plaster, concrete, aerated concrete, masonry and sand-cement screeds. Apply with brush or foam roller in two coats; reinforce joints and corners with Anti-Crack tape.

Contents: 0.70 L (tin)
Coverage: approx. 3 m²/L (± 2.1 m² per pack) or about 8 linear metres of corner per litre
2 coats · drying time approx. 12 hours (20 °C)
Application temperature: 5–25 °C
Base: acrylic resin · colour: white (dries transparent)
Indoor use: bathroom, shower, kitchen, wet rooms

How to use

Clean the substrate of dust and grease. Fill cracks and holes with Water Pressure Stop. A separate primer is unnecessary; the surface may be slightly damp.
Stir Bathroom Protect thoroughly before use.
Apply a first coat with brush or roller (± 0.15 L/m²).
After about 2–3 hours (20 °C), reinforce all wall–floor junctions with Anti-Crack tape (horizontal corners first, then vertical).
Apply a second coat immediately afterwards; add an extra coat around pipes and drains.
Allow to dry for approx. 12 hours before tiling or use. Ventilate the room well.

Specifications