These Carpoint jumper cables are the solution if the car no longer wants to start due to an empty battery. The jumper cables are suitable for 12 and 24 Volt batteries and can carry a load of up to 400 amperes. The length of the starter cable is 3 meters with fully insulated clamps. Connecting jumper cables: Clamp the red jumper cable to the + pole of the empty battery. Connect the other red clamp to the + pole of a good battery. Connect the black jumper cable to the - pole of the full battery. Place the other remaining black clamp on a ground part of the vehicle with the empty battery, a metal part of the engine or unpainted bodywork part. After this, start the engine of the vehicle that provides assistance and then start the engine of the vehicle with the empty battery. Disconnecting the jumper cables should be done in reverse order. After use, store the Carpoint jumper cables in the supplied carrying bag and keep them in the car so that you always have the jumper cables at hand. View the entire description